v21 Date: 2023-03-11 Updates： Support curtain control Support HomeKit

v21 Date: 2023-03-11 Updates： Support curtain control Support HomeKit

v32 Date: 2023-01-30 Updates： Improve support for changing direction

v21 Date: 2022-01-17 Updates： Support HomeKit

v279 Date: 2023-01-17 Updates： Optimize dimming effect Optimize color temperature range

v84 Date: 2022-12-06 Updates： Adjust device profile（Requires Home Center v3.1.50 or later)

v35 Date: 2022-12-06 Updates： Support HomeKit（Requires Home Center v3.1.50 or later)

v40 Date: 2022-11-30 Updates： Support use external temperature sensor (Requires Home Center v3.1.50 or later) Cusmoized models can control AC that support fan speed with 0~10v (Requires Home Center v3.1.50 or later)

v37 Date: 2023-08-23 Updates： Support using the motion sensor in automation v22 Date: 2022-08-26 Updates： Improve support for high power load Turn on LED when approching to it Improve LED status

v16 Date: 2022-06-08 Updates： Supports HomeKit

v69 Date: 2022-06-08 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v16 Date: 2022-06-08 Updates： Supports HomeKit

v69 Date: 2022-06-08 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v193 Date: 2021-12-31 Updates： Optimize light dimming effect Optimize color temperature Support triggering ZigBee network pairing with Smart Dial

v32 Date: 2021-10-10 Updates： Support HomeKit

v19 Date: 2021-10-10 Updates： Support HomeKit

v156 Date: 2021-09-06 Updates： Support persist light state after the driver reboot

v267 Date: 2022-05-07 Updates： Support change dimming time of on/off Support change the min & max color temperature Support change C/W wiring Support change dimming curve v176 Date: 2021-12-27 Updates： Optimize light dimming effect Support change led light mode between brightness only or brightness and color temperature mode Optomize triggering ZigBee network pairing with Smart Dial v99 Date: 2021-09-17 Updates： Optimize light dimming effect Support triggering ZigBee network pairing with Smart Dial v92 Date: 2021-09-06

v267 Date: 2022-05-07 Updates： Support change dimming time of on/off Support change the min & max color temperature Support change C/W wiring Support change dimming curve v176 Date: 2021-12-27 Updates： Optimize light dimming effect Support change led light mode between brightness only or brightness and color temperature mode Optomize triggering ZigBee network pairing with Smart Dial v99 Date: 2021-09-17 Updates： Optimize light dimming effect Support triggering ZigBee network pairing with Smart Dial v92 Date: 2021-09-06

v25 Date: 2021-10-10 Updates： Support HomeKit

v22 Date: 2022-02-18 Updates： Improve calibration process Support setting LED on / off v17 Date: 2021-10-10 Updates： Support HomeKit

v4 Date: 2021-07-10 Updates： Support HomeKit

v198 Date: 2022-01-28 Updates： Support change light mode to brightness only v65 Date: 2021-07-10 Updates： Support persist light state after the driver reboot

v7 Date: 2021-05-10 Updates： Fix bug: can’t turn off when brightness is blow 10%

v5 Date: 2021-04-12 Updates： Support HomeKit

v178 Date: 2021-12-28 Updates： Optimize light dimming effect Optimize color temperature Support triggering ZigBee network pairing with Smart Dial v71 Date: 2021-07-22 Updates： Preserve light state after reboot Improve lighting effect v20 Date: 2021-04-22 Updates： Support hyper sync

v8 Date: 2021-08-03 Updates： Supports programmable switch v6 Date: 2021-07-23 Updates： Supports reset device via reset button v3 Date: 2021-07-15 Updates： Supports HomeKit

v21 Date: 2021-07-05 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v21 Date: 2021-07-15 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v8 Date: 2021-08-03 Updates： Supports programmable switch v6 Date: 2021-07-23 Updates： Supports reset device via reset button v3 Date: 2021-07-15 Updates： Supports HomeKit

v1 Date: 2021-03-02 Updates：

v10 Date: 2022-01-01 Updates: Fix mapping of button and relay Support PushDimmer

v3.0.29 Date: 2023-08-25 Updates: Support use the LED of programmable button to indicate the state of a on off device or scene (Requires Home Center v3.2.3 or later) Support sync the device name, room name of virtual Home Center to sub Home Center Support configure the features to expose to HomeKit of device group Support grouping of corazon curtain Support change light type for TERNCY-ST01-CV Support multiple conditon in automation v3.

v3.2.4 Date: 2023-09-13 Chanel：Alpha Update: Support integration of Sensibo IR ac controller Support configuring functions exposed to HomeKit for device group Support grouping of corazon curtain motor Support reflecting status of on off device or scen with spare LED on wall switch Support DIM004 Support TWJH1 Support TERNCY-WS11-D4 Support TERNCY-HV02 Fix bug: error 180 when controlling device Support getting device of Home Center group in local mode Fix bug: the scene activation status may not be right when the brightness is low Change resetting method to press the reset button four thimes, and hold the button on fouth click untill the yellow LED starts flashing Support add device of specific model Fix bug: failed to control device in home center group in local sdk Some features require Terncy App App 3.

v76 Date: 2021-02-08 Updates： Support scheduled reboot, requires Home Center v3.0.22 or later v64 Date: 2021-01-20 Updates： Support hyper sync, requires Home Center v3.0.17 or later v61 Date: 2019-11-27 Updates： Fix functional bugs Improve network performance v58 Date: 2019-08-16 Updates： Support legacy switch Support interlock mode Support drive external LED indicator

v27 Date: 2021-01-13 Updates： Support use door bell button as programmable switch in HomeKit v23 Date: 2020-12-02 Updates： Support HomeKit

v35 Date: 2020-12-02 Updates： Support HomeKit

v13 Date: 2020-12-02 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v1 Date: 2020-12-02 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v36 Date: 2021-08-12 Updates： Improve support for Bluetooth ZigBee mode switch v21 Date: 2020-12-02 Updates： Support HomeKit

v35 Date: 2020-12-02 Updates： Support HomeKit

v18 Date: 2020-12-02 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v1 Date: 2020-12-02 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v36 Date: 2021-08-12 Updates： Improve support for Bluetooth ZigBee mode switch v21 Date: 2020-12-02 Updates： Support HomeKit

v68 Date: 2022-11-21 Updates： Optimize notification for low battery v66 Date: 2022-01-03 Updates： Fix bug, the rf icon may not show on the front panel v61 Date: 2020-03-31 Updates： Support lock key management v6 Date: 2020-12-02 Updates： Firmware for ZigBee platform

v34 Date: 2020-11-22 Updates： Support HomeKit

v168 Date: 2022-06-30 Updates： Improve support for high power load v162 Date: 2020-11-22 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v34 Date: 2020-11-22 Updates： Support HomeKit

v161 Date: 2020-11-22 Updates： Supports “Permanent Power”, which allows continuous power to your smart lighting devices Supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v44 Date: 2020-11-25 Updates： Correct version information Fix bug: the motor may not be able to join network v43 Date: 2019-11-11 Updates： Optimize performance when control the curtain rapidly v14 Date: 2019-10-11 Updates： Fix the problem of crutain may not stop stably v14 Date: 2019-09-11 Updates： Support curtain control

v5 Date: 2020-08-04 Updates: Support HomeKit Support control brightness

v6 Date: 2020-11-18 Updates: Improve ota support v5 Date: 2020-08-04 Updates: Support HomeKit Support control brightness, color and color temperature

v52 Date: 2023-7-24 Updates: Support change light mode between brighness, color temperature or color light (Requires Terncy App 3.0.28 and above version ) v50 Date: 2023-05-09 Updates: Support reset device by power on and off 5 times Support transition time on power on off action Retain brightness after turnning on again Retain color temperature after power on again Indicate zigbee network status via LED by pressing the button v19 Date: 2021-02-07

v32 Date: 2020-10-10 Updates： Improve curtain control Fix bug of occasional offline v17 Date: 2019-09-11 Updates： Support shades control

v14 Date: 2021-04-20 Updates: Support hyper sync Fix a bug that the light may go off under low brightness level v7 Date: 2020-09-22 Updates: Support ZigBee Support control brightness

v15 Date: 2022-08-03 Updates： Improve support for high power load v9 Date: 2020-09-03 Updates: Supports “Permanent Power”, which allows continuous power to your smart lighting devices Fix issue of LED status isn’t correct Terncy Wall Switch now supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness

v16 Date: 2021-02-08 Updates： Support scheduled reboot, requires Home Center v3.0.22 or later Support hyper sync v12 Date: 2020-08-16 Updates： Support reset by long pressing the button in the back

v23 Date: 2020-07-15 Updates： Fix bug v22 Date: 2020-04-29 Updates： Fix device version number Support changing to Zigbee mode v15 Date: 2020-01-01 Updates： Authorization data isn’t manadatory for HomeKit control anymore v14 Date: 2019-11-18 Updates： Optimize wireless performance, improve support for HomePod Support auto-relock feature v13 Date: 2019-09-11 Updates： Support HomeKit

v110 Date: 2020-06-14 Updates: Support turn off socket, then turn it back on after few seconds. Useful for scenario like rebooting WiFi router v102 Date: 2019-01-21 Updates： Support turn off LED indicator Support preserve on/off status after lose power Support relay for door sensor with lower power consumption

v154 Date: 2020-05-24 Updates： Optimize wireless pairing logic, fix the potential offline issue Optimize power consumption when the device isn’t paired v137 Date: 2019-02-22 Updates： Reduce power consumption

v95 Date: 2020-05-11 Updates: Terncy Wall Switch now supports “Permanent Power”, which allows continuous power to your smart lighting devices Terncy Wall Switch now supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness Support interlock rules between outputs (avoid multiple outpus being set to on at the same time) After an input is set to programmable, the corresponding output can still controlled independently Requires Home Center v2.

v62 Date: 2021-03-01 Updates： Support Lock Key management v34 Date: 2020-05-08 Updates： Firmware for ZigBee platform Support auto relock after the lock is open Support email, wechat notification for lock events Optimize the fucntion of re-join network after home center reboot

v142 Date: 2020-05-07 Updates： Optimize power consumption Optimize wireless pairing logic, fix the potential offline issue Support adjusting PIR sensor cool down time Requires Home Center v2.6.65 or later v117 Date: 2019-11-11 Updates： Optimize power consumption Fix bug, awareness switch may go offline and can’t join network automatically v115 Date: 2019-09-18 Updates： Fix bug, awareness switch may go offline after long idle Applicable on Home Center v2.

No release history available

v29 Date: 2020-03-26 Updates： Fix bug: can’t turn off after set dim level v23 Date: 2020-04-11 Updates： Fix bug: cool, warm color temperature is reverted.

v52 Date: 2019-11-11 Updates： Optimize ZigBee network performance v44 Date: 2019-01-21 Updates： Support turn off LED indicator Support relay for door sensor with lower power consumption

v37 Date: 2022-01-01 Updates: Support triggering light reset (How to use: place the smart dial as close as possible to the light; press the smart dial 6 times quickly and hold the button for about 5 seconds, till the light starts blinking; hold the button for 5 more seconds) v26 Date: 2020-05-27 Updates: Optimize wireless pairing logic, fix the potential offline issue Optimize power consumption when the device isn’t paired v18 Date: 2020-02-12

v16 Date: 2020-03-12 Updates: Improve wireless coverage v14 Date: 2019-09-03 Updates: Fix bug, may not be able to join zigbee network again Fix bug, may not show sub unit for some models v10 Date: 2019-08-31 Updates: Optimize wireless network v8 Date: 2019-08-18 Updates: Support central airconditioners Optimize algorithm for finding airconditioner sub unit

v51 Date: 2019-10-27 Updates: Terncy Wall Switch now supports “Permanent Power”, which allows continuous power to your smart lighting devices Terncy Wall Switch now supports “I/O Remap”, which allows swapping the buttons on Wall Switch in relation to the outputs, with increased reliability and responsiveness Fix bug of wall switch may disconnect v43 Date: 2019-07-16 Updates: Support interlock rules between outputs (avoid multiple outpus being set to on at the same time) After an input is set to programmable, the corresponding output can still controlled independently Applicable on Home Center v2.

v80 Date: 2019-01-21 Updates： Support relay for door sensor with lower power consumption

v2.1.1 Date: 2019-07-03 Updates: Support Terncy automation rules Need Home Center v2.6.10 or later to work Support management of HomeKit devices in iOS Support change device OTA channel between stable, test and development Support connecting to Home Center in LAN mode Currently support only one condition in automation rules Support change ZigBee RF channel Support wall switch, switch module’s inputs as programmable switch Support interlock between wall switch, switch module’s outputs v2.